ASH50-100, Soda Ash, 50 lb. UPS Pack, ASH50-100


Soda Ash injection is used if water is acidic (low pH). Soda ash (sodium carbonate) raises the pH of water to near neutral when injected into a water system. Unlike neutralizing filters, they do not cause hardness problems in treated water. A corrosion-resistant chemical feed pump should be used to inject a soda ash solution into the water.

If the water needs to be disinfected as well as neutralized, dual treatment is possible within the injection system by adding a chlorine solution (sodium hypochlorite) along with the neutralizing chemical.

Soda ash can treat water with a pH as low as 4.

The solubility of soda ash is dependent on temperature. The following chart shows how much will stay in solution without forming a precipitate in the solution tank, injector line and chemical feed pump.

About 3 pounds of soda ash to 4 or 5 gallons of water is the strongest solution that should be attempted. Soda ash has a tendency to stop up feeder lines and check valves associated with the chemical feed pump. Problems can be minimized by keeping the solution mixture as weak as possible to get the pH adjustment needed.

When injected into a water system with a chemical feed pump, soda ash will neutralize acid water and eliminate corrosion problems. Also used as a cleaner for Tannin type water softeners.

Related Documents :

Safety Data Sheet

Additional information


Univar Cleveland



Cubic Foot


Item Type

Soda Ash

Item Weight

53.82 lbs per EA

My cart
Your cart is empty.

Looks like you haven't made a choice yet.