MANG-OX-25-BOX, =Mang-Ox 1/4 CF UPS PAK,
MangOx is a high rate, granular filter media used for removing hydrogen sulfide, iron and manganese compounds from water supplies. MangOx operates both as a classical filter working with an oxidant and as a catalytic media due to its ability to accelerate the reaction between the oxidizing agent and any prevalent dissolved oxygen with sulfide, iron and manganese present. Dissolved iron, manganese and hydrogen sulfide will stay in solution unless the equilibrium is changed. Iron and manganese that is not oxidized become catalytically precipitated and then adsorbed directly on the media. MangOx is a very dense media that stops oxidized (precipitated) forms of iron, manganese and hydrogen sulfide from passing through the bed. Most of the manganous manganese is rapidly removed in the first few inches of the media where it is further oxidized to manganese dioxide.
The media must be properly back washed to break loose and remove the filtered contaminants and precipitated iron, manganese and hydrogen sulfide. System sizing of the control valve and tank are necessary to sustain media performance.
A continuous reaction occurs with the addition of an oxidant, regenerating the media surface and replenishing the MangOx. For difficult applications, MangOx filters can be enhanced with aeration, chlorination, and ozone. Because of MangOxs naturally high manganese dioxide content, it provides a higher adsorption capacity than other media. A MangOx filter is recommended before softeners to protect the ion exchange resin from fouling.
MangOx operates both as a classical filter working with an oxidant and as a catalytic media due to its ability to accelerate the reaction between the oxidizing agent and any prevalent dissolved oxygen with sulfide, iron and manganese present. No regenerates required, backwash only. Will not remove orange iron, tannins or sulphur bacteria. 60 pound 1/2 cubic foot bag.
Removal of Iron up to 10 ppm
Removal of Manganese up to 5 ppm
Removal of Hydrogen Sulfide (rotten egg smell) up to 3 ppm
Not recommended for Iron Bacteria and Manganese bacteria removal
Not recommended for tannin and organics removal
Efficient reduction of manganese, iron & hydrogen sulfide
Will process high flow rates with low pressure drop
Ability to be utilized with common oxidants including:
– CL2 (gas), – Sodium hypochlorite,
– Potassium Permanganate
10 30 second reaction time with oxidant additive
Converts ferrous iron to ferric iron
Converts H2S to sulphur
Converts Manganese to MnO2
Allows for adequate reaction time to permit for the formation of ferric hydroxide
Allows for physical straining of the ferric hydroxide floc and sulphur until media requires back washing
Allows for adsorption of MnO
NSF/ANSI Standard 61-2002 Certified
Related Documents :
28.5 lbs per EA